Desoldering Tool 2 IN 1 Anti-static electric suction tin soldering
Panel, Suction Tin Soldering Iron Handle Diagram
|Suction tin soldering station power||≤80W|
|Soldering iron power||60W|
|Suction tin gun temperature range||350°C~480°C|
|Soldering iron temperature range||200°C~480°C|
|Temperature stability||±1°C (static)|
|Heating element voltage||AC 26V ±10%|
|Desoldering pump power||12W|
|Tip of ground impedance||<2ohm|
|Dimensions||L234 x W202 x H134mm ±5mm|
|Length of cable||≥120cm|
|Product||Desoldering Tool 2 IN 1 Anti-static electric suction tin soldering
1. Desoldering Tool 2 IN 1 Anti-static electric suction tin
soldering station uses PID programmable temperature control
sophisticated PID programming into the machine to rapidly track,
correct the actual temperatures of the suction tin soldering
station and high
frequency soldering station. Rapid temperature compensation reduces
temperature error. Temperature stability and temperature
speed are significantly better than similar products.
2. With suction tin gun and soldering iron two functions, this two
intelligent Recognition. When you need suction tin soldering
soldering iron, and connect suction tin gun, the machine can
recognition. When you need soldering iron, take out suction tin
station, and connect soldering iron, the machine can intelligent
3. Anti-static design, prevent static electricity or leakage damage
4. Built-in vacuum, strong suction, no external vacuum system, easy
5. Adopt isolated transformer power supply to heating, power supply
low voltage, safe and reliable
6. Stand with the integration design, installed on the side of the
stable, don't worry the stand shift that affect the operation.
7. The machine is designed with the following powerful features of
A. Sleep function:
Machine with self-detection functionality automatically, when it is
and not in use, pauses fora set duration prior to sleep mode, and
automatically cools to200°C. It will then enter sleep mode to
soldering iron oxidation and effectively extend soldering iron head
life while retaining energy savings and environmental protection.
time ranges from: 1~99 minutes, in1 minute intervals. Users can set
according to personal usage patterns. If the sleep function is not
for the soldering iron, the sleep time should be set to:
a. Shake soldering iron handle/push red button
b. Press any key.
c. Turn off the power switch on again.
B. Auto-off function:
After the machine into hibernation, the program start time, in the
time not wake dormant, the machine will automatically shut down,
environmental protection. Automatic shutdown time setting range:
minutes, in steps of 1 minute.
C. Temperature calibration
Because of the environmental impact or replacement heater and the
soldering iron tip parts that cause deviation between solder iron
and display temperature , you can use this function for
D. Celsius/ Fahrenheit temperature display function:
To meet the market needs of different regions and design
display mode, you can select according to customary interest.
8. The tin suction mouth and heating pipe use special design, so
the solder can
be inhaled filter in the molten state, which don’t need to maintain
and high work efficiency.
9. Using silicone heat-resistant hose to prevent from contacting
element which will cause damage.
10. The Internal use SMT double-sided board manufacturing process.
process is neat, and the flow signal is clear. The stability and
performance of the machine are further improved, which make the
can adapt to all kinds of bad environment.
Leisto Industrial Co., Limited
Tel: +86 755-29472883
Whatsapp: +86 13600142750